Wall Leak Diverter

SKU: 4933-24R


Shipping calculated at checkout

Capture and divert water running down your walls from leaking roofs or overhead pipes.
Made from .080 gauge white acrylic sheets.
2' or 4' lengths. Can be purchased with discharge valves in right or left corners.
Kit comes complete with 12' of clear 1/2" tubing, 4 plastic wall anchors, 4 screws and sealant for top edge.
Item #'s 4933-24L & 4933-48L have the drain in the left corner of the diverter.
Item #'s 4933-24R & 4933-48R have the drain in the right corner of the diverter.

Customer Reviews

Based on 2 reviews
Andy Lars (Arlington, US)
Worked well…. Recommended

Hydraulic cement failed around a basement waste pipe egress. Had to cut the unit down to 9” in length and reassemble one of the ends (probably should’ve emailed company and asked if they’d make one smaller), which took a while … because the wall has a 1/2” inset where the leak is. Anyway, works great . Extended hose a bit to reach my sump. Buys me time until I get around to replacing the cement. Totally happy with it.

Howard L (Boxborough, US)
Perfect and only practical solution for basement wall leak

We have an early 90s house which, unwisely, brought main power and other services into the basement below ground level. Over time those conduits began letting in water (several electricians and an inspector told me it's common and not dangerous). In very wet weather these basement wall penetrations weep water. The wall diverter collects the water and empties into a sump with a sump pump. I had 2 plumbers and 2 contractors look at the problem but none could propose a better solution than the wall diverter, because it collects water that would otherwise dribble down the wall.

You may also like

Recently viewed