Sizes range from an inside ring diameter, "ID" of 1" thru 22" and an outside diameter "OD" of 2" thru 23-1/2".
Strong acrylic does not stretch but does bend slightly.
Hide unfinished edges and oversized cuts on sheetrock.
A convenient and attractive means for covering the edges of a miscut or too large ceiling opening for high hat lighting or J-box ceiling-hole opening when installing security equipment such as cameras, infrared detectors, or other box-mounted devices.
Ready to install.
Just place it "sandwich" between the fixture and the wall or ceiling surface.
Also known as Recessed Light Trim Rings, oops rings, or ceiling medallions.
Paintable, we recommend an aerosol paint made for plastic.
Watch the video to better understand the process.
Great for Lithonia and Lotus LED Lights.
PLEASE MAKE NOTE OF THIS ITEM WHEN ORDERING: Your flange/trim width will be only HALF of the difference between the OD and ID. Example: OD of 8" and ID of 5" will only give you a 1-1/2" wide flange/trim and not 3". See more pictures for a detailed explanation of this.
PLEASE MAKE SURE THAT THE "OD" IS AT LEAST 1" LARGER THAN THE "ID".
THESE ARE CUSTOM GOOF RINGS. THE FABRICATION PROCESS TAKES TIME. We may be able to expedite an order, please send an email to sales@1800ceiling.com with your quantities needed and the size of the ring. We will try to accommodate your request.
Sizes range from an inside ring diameter, "ID" of 1" thru 22" and an outside diameter "OD" of 2" thru 23-1/2".
Strong acrylic does not stretch but does bend slightly.
Hide unfinished edges and oversized cuts on sheetrock.
A convenient and attractive means for covering the edges of a miscut or too large ceiling opening for high hat lighting or J-box ceiling-hole opening when installing security equipment such as cameras, infrared detectors, or other box-mounted devices.
Ready to install.
Just place it "sandwich" between the fixture and the wall or ceiling surface.
Also known as Recessed Light Trim Rings, oops rings, or ceiling medallions.
Paintable, we recommend an aerosol paint made for plastic.
Watch the video to better understand the process.
Great for Lithonia and Lotus LED Lights.
PLEASE MAKE NOTE OF THIS ITEM WHEN ORDERING: Your flange/trim width will be only HALF of the difference between the OD and ID. Example: OD of 8" and ID of 5" will only give you a 1-1/2" wide flange/trim and not 3". See more pictures for a detailed explanation of this.
PLEASE MAKE SURE THAT THE "OD" IS AT LEAST 1" LARGER THAN THE "ID".
THESE ARE CUSTOM GOOF RINGS. THE FABRICATION PROCESS TAKES TIME. We may be able to expedite an order, please send an email to sales@1800ceiling.com with your quantities needed and the size of the ring. We will try to accommodate your request.
Some of the products sold by 1800ceiling.com are included in the California Proposition 65 warning. What is Proposition 65?
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that causecancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals.
Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.
Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or otherreproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987.
Proposition 65 became law in November 1986, when California voters approved it by a 63-37 percent margin. The official name of Proposition 65 is the Safe Drinking Water and Toxic Enforcement Act of 1986.
CLEAR Acrylic Disc & Table Top Protectors, .118g or .220g Thick
Brewer guy
Great product! Arrived Perfectly
I ordered three light fixture covers for some obsolete fixtures that I don't want to change. They sent out a sample to ensure the perfect fit and then I received the covers. To say that they were well packaged is a bit of an understatement. It took me a solid 10 minutes to crack the packaging open. I believe it could have withstood a tactical nuke with zero damage, and the covers fit great. I'm very pleased with my purchase.
1800ceiling
Joanne DiNatale
Very helpful and prompt service. Thank you for all your assistance in our needs to complete our skylight project!
1800ceiling
Alton “Al” Danks
The diffuser tent was sturdier than I expected. It fit my 2x2 diffuser without any modifications. It was easy to cut out the opening for the vent duct. Delivery was quick too.
