2' Frosted Linear Air Diverter [actual length=22-1/4"] Item # 4874T-24
This 2' long frosted diverter works by pushing the air away in a 45 degree angle. If you are sitting right under the vent, this might not be the best choice. Use item # 4875 to divert air in a 90 degree direction, across the ceiling.
Item #4874T is best used to shield drafts from linear vents along the perimeter of the room or very close to the windows.
Item # 4874T-24 actual size: 22.25" long x 6.9" in width. Made from impact modified frosted acrylic.
45-Degree Linear Diffuser for 2' long vent
A 45-degree linear air diverter redirects unwanted, constant blowing air from a ceiling strip-line vent at a 45-degree angle so it is more evenly dispersed throughout the room. This linear air diverter is easy to install. It simply snaps in place with no tools needed. Most importantly, it diverts air flow without compromising or impeding the air flow quality the building's HVAC system is designed to deliver.
Since this linear diffuser is made from 100% high-impact frosted acrylic, it blends easily into your office's design and it will last for years. It is designed to fit standard-sized 2' sections of strip vents, but it can be easily shortened to fit any custom-sized vent using a hack saw with a fine tip blade. This item effectively diverts air at a 45 degree angle. If you are looking for a linear diffuser that diverts air at a full 90-degrees, then you will want Item 4875.
Actual length of this item is 22-1/4"
WARNING – California prop 65 warning: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
|Item #||4874T-24 old item # 4874-24|